It’s not just manufacturing – it’s critical capabilities. There are many factors of global supply chain challenges rising that are associated with obsolete parts and the risk of counterfeit components entering the supply chain such as... IEC’s on-site laboratories utilize advanced methodologies to perform sophisticated manufacturing process development and state of the art testing for components, PCBAs, cables…, Copyright 2020 IEC Electronics | All Rights Reserved | Terms & Conditions | Quote Terms | Supplier Quality Provisions | Supplier Code of Conduct | a sharp solution from Sharp Notions, Copyright 2020 IEC Electronics | All Rights Reserved |, Solar, wind, & hydro power conversion equipment. John Petty Laboratory Director at IEC Electronics Analysis and Testing Laboratories Albuquerque, New Mexico 216 connections IEC Qualifies as a Suitable Equipped Laboratory as Part of DLA’s Qualified Testing Supplier List. Systematic process of disassembling, testing, and inspecting electronic components to assess quality and reliability. Provides high resolution and high depth-of-field images by scanning the surface with a focused beam of electrons. IEC Electronics Corp.’s Analysis and Testing Laboratory in Albuquerque, NM, has been reaccredited by ANAB to ISO/IEC 17025:2005. IEC’s International Standards are established through a consensus process involving 20,000 international experts from industry, government and leading testing laboratories, including BSI. About IEC Electronics Corp. ... IEC Electronics Corp-Albuquerque and IEC Analysis & Testing Laboratory, LLC. Identifies the classification level of non-hermetic solid-state surface mount devices (SMDs) that are sensitive to moisture-induced stress. These devices and systems are built to withstand the elements where failure is not an option. Vertical manufacturing solutions, combined with engineering expertise, we control the supply chain to minimize risk to yours. Determines the ability to withstand exposure to alternating extremes of high and low temperatures. It operates at locations, including Newark, New York; Rochester, New York, and Albuquerque, New Mexico. We offer various imaging modes, including C mode and through scan. Test to: AEC-Q101, JESD22-B107, MIL-STD-202 Method 215, MIL-STD-883 Method 2015. DPA is routinely used in the aerospace industry during up-screening to qualify commercial off-the-shelf (COTS) to class “S”. Dennis Trujeque Lab Manager at IEC Electronics Analysis and Testing Laboratory Albuquerque, New Mexico Area 2 connections The industries that we support demand expertise and flexibility in the manufacturing process to support their critical supply chain needs. Read More Numerous electrical, mechanical, and environmental tests are performed to verify the internal design, materials, construction, and workmanship. It is a non-destructive test used in total lot screening applications. IEC is the first and only electronic manufacturing services (EMS) provider with an on-site testing laboratory to receive ISO/IEC 17025 … Designed to artificially age components and circuit boards, to replicate shelf life, Test to: IPC-650, JSTD-002, MIL-STD-883 Method 2003, MIL-STD-202 Method 208, AEC-Q101, J-STD-002. The IEC uses the name IECEE for the IEC System for Conformity Testing and Certification of Electrotechnical Equipment and Components, known as the CB Scheme. Product Testing and Compliance for Medical Laboratory Equipment to IEC 61010. Similar to THB testing, as they both test for the same failure mechanism. The experts at IEC Electronics leverage the sophisticated technology in the lab and their vast knowledge of reliability physics to develop test plans using both stress-based and knowledge-based reliability qualification methodologies. NEWARK, NY –(Marketwired – November 13, 2017) – IEC Electronics Corp. (NYSE American: IEC) (NYSE MKT: IEC) today announced its Analysis and Testing Laboratory in Albuquerque, NM has once again received an ISO/IEC 17025:2005 accreditation from the ANSI-ASQ National Accreditation Board (ANAB). Beneficial for uses in failure analysis, dimensional analysis process characterization, reverse engineering, and particle identification, Test to: DLA Suitability per MIL-STD 883 Method 2018, AS6171-2. Evaluates the solderability of terminations using SnPb or Pb-free solder. IEC has the ingenuity and mastery of electronics, metals, and interconnect solutions that control the supply chain and minimize risk for our customers. Newark, NY (GLOBE NEWSWIRE) - IEC Electronics Corp. (NYSE American: IEC) (“the Company”) today announced that it has expanded its services with the Defense Logistics Agency (“DLA”) as a suitable equipped laboratory as part of the agency’s Qualified Testing Supplier List (QTSL). Measures device resistance to temperature storage environment. Other Electronics testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs include : Testing experts with cross disciplinary know-how. The IEC lab is now approved to perform the MIL-STD-202 Test Method which includes environmental, physical, and electrical tests for electronic and electrical … Our former subsidiary, IEC California Holdings, Inc., was dissolved as of September 18, 2019. Test to: IPC/JEDEC, J-STD-020, J-STD-033, J-STD-035, AS6171-6, Non-destructive inspection tool used to examine components not visible on the exterior of the sample, Non-destructive tool that uses tomosynthesis (or CT) technique to create 2-D X-ray slices of any plane of a printed circuit board assembly. NEWARK, NY –(Marketwired – November 13, 2017) – IEC Electronics Corp. (NYSE American: IEC) (NYSE MKT: IEC) today announced its Analysis and Testing Laboratory in Albuquerque, NM has once again received an ISO/IEC 17025:2005 accreditation from the ANSI-ASQ National Accreditation Board (ANAB).The scope of the accreditation includes several SAE AS6171 test methods for … Methods utilized: liquid-to-liquid or air-to-air depending on device requirements, Test to: MIL-STD-202 Method 107, MIL-STD 883 Method 1010, MIL-STD 883 Method 1011. A spectroscopic technique that uses interferometry to obtain an infrared spectrum of absorption or emission. Its subsidiaries include IEC California Holdings, Inc., IEC Electronics Corp-Albuquerque and IEC Analysis & Testing Laboratory, LLC. Using our scientific expertise we strive to detect the “undetectable.” With our state-of-the art equipment and superior know-how, we solve your most complex design challenges. Newark, New York — IEC Electronics Corp. announced that it has expanded its services with the Defense Logistics Agency (“DLA”) as a suitable equipped laboratory as part of the agency’s Qualified Testing Supplier List (QTSL). We provide Story-Worthy Service to customers around the globe who are developing, expanding and supplementing their quality and engineering resources. IEC Electronics has extensive experience with the complex electronic assemblies required for Class II & Class III medical devices. IEC Electronics specializes in providing manufacturing services for advanced technology companies whose products are highly complex and must conform to the industry’s highest levels of quality and reliability. NEWARK, New York, July 09, 2019 — IEC Electronics Corp. (NYSE American: IEC) (“the Company”) today announced that it has expanded its services with the Defense Logistics Agency (“DLA”) as a suitable equipped laboratory as part of the agency’s Qualified Testing Supplier List (QTSL). Evaluates the integrity of package and device construction using ultrasound waves. Non-destructive technique used for elemental identification of materials. At IEC Electronics, we investigate beyond what caused the problem, we determine how and why. China Quality Certification Center (CQC) Test to: DLA suitability, MIL-STD-1580, MIL-STD-883, MIL-STD-202, SSQ-25000. In this section you are able to download brochures that give you a succinct overview of the IEC, its role and structure, how it impacts global trade and supports industry. This also involves preconditioning to assess device package solderability. This will determine classification level for Preconditioning. Used to measure the resistance of non-hermetic surface mount devices to worst-case moisture absorption followed by the soldering process and rework. Below are some examples of the most recent incoming Laboratory Testing Requests that we have received from companies, governments and organizations looking for laboratories and scientific research facilities to perform their Testing, Scientific Research, Analysis, Assay, Product Development, Certifications, Inspections. Test to: MIL-STD-883 Method 2009, MIL-STD-750 Method 2068, MIL-STD-750 Method 2071, MIL-STD-1580, AS5553, AS6171, AS6081, GEIA-STD-006, JESD22-B101, IDEA-STD-1010, Evaluates the quality of passivation, metallization, and other die related components, Test to: MIL-STD-750, MIL-STD-883, MIL-STD-1580. IEC 61010: Medical Laboratory Equipment Testing. Medical device product development and manufacturing requires an in-depth knowledge of the regulatory standards regarding validation and traceability. Contact Info. It examines and documents physical characteristics including material elemental composition, dimensions, and quality details of the assembly. Whether you need maximum value and fast response from a single test or complete outsourced integration with our manufacturing services, IEC Electronics can perform testing to meet your requirements with strict adherence to industry standards. IEC Electronics is headquartered in Newark, NY and also has operations in Rochester, NY and Albuquerque, NM. IECEE Global Motor Energy Efficiency (GMEE) Test conditions vary based on type of sample being tested. Chemical analysis method used to determine the elemental composition of a point, line, or areas. We frequently inspect common products such as insulators, batteries, cables, wires, lights, connectors, circuit breakers, and other electronic components, determining the causes of electrical failures and affirming the soundness of working products. IEC Electronics Analysis & Testing Laboratory Receives ISO/IEC 17025 Accreditation Renewal NEWARK, NY--(Marketwired - November 13, 2017) - IEC Electronics Corp. (NYSE American: IEC) (NYSE MKT: IEC) today announced its Analysis and Testing Laboratory in Albuquerque, NM has once again received an ISO/IEC 17025:2005 accreditation from the ANSI-ASQ National Accreditation Board (ANAB). Eurofins Electrical and Industrial laboratories offer accredited Medical device testing for EN/IEC 60601 & EN/IEC 61010 series for medical electrical equipment under the Medical Devices Directive (MDD) 93/42/EEC and In Vitro Diagnostics Devices Directive (IVDD) 98/79/EC approvals. Electrical Testing Laboratory Applied Technical Services offers a broad spectrum of electrical and electronic product testing. Fine and Gross Leak testing is available to determine the seal integrity of the package. IEC Electronics has the unique capability of an on-site ISO 17025 certified testing facility that is a DLA approved QTSL Laboratory focusing on failure analysis, destructive physical analysis (DPA), and component risk mitigation. IIA Laboratory Services has grown to be one of the largest dedicated quality service providers. You will find an outline of the IEC organizational strategy and a summary of IEC work in individual technology sectors. Specific cycling rates and other test conditions for components, boards, solder interconnects, or tin whisker evaluations can be specified. Laboratory Testing Requests. Often caused by dirt, fibers, solder residues, and other elements trapped inside the cavity during the sealing process. Test to: JESD22-A113, J-STD-020, J-STD-035. We specialize in complex electronics and full system assemblies for life-saving and mission critical products. NEWARK, NY--(Marketwired - November 13, 2017) - IEC Electronics Corp. (NYSE American: IEC) (NYSE MKT: IEC) today announced its Analysis and Testing Laboratory in Albuquerque, Ensures reliability of the device as loss of hermeticity will allow moisture and contaminants to enter the package cavity. To ensure your equipment remains in compliance with the latest revision of 61010, our regulatory experts are dedicated to helping you identify areas of product non-compliance that will need to be addressed and retested prior to the standard’s enforcement deadline … One location for environmental and mechanical testing with failure analysis laboratory. Testing laboratory can be said to run effectively when it can manage or manage flexibility, customer, production, value-oriented, and the main job of its employees. It combines elevated temperate and voltage to accelerate failure mechanisms. Series of non-destructive and destructive tests that evaluate the quality of a component. Looking for an expert Laboratory Director in Brand Marketing & Management, Communications & PR, Marketing Research & Analysis? This is done to reveal components with anomalies or defects that may cause degradation or system failure. The QTSL Program maintains a list of pre-qualified sources for certain […] Bloomberg the Company & Its Products The Company & its Products Bloomberg Terminal Demo Request Bloomberg Anywhere Remote Login Bloomberg Anywhere Login Bloomberg Customer Support Customer Support 14513-1218. It offers its customers a range of manufacturing services, combined with scientific technical support. Additionally, the on-site lab allows for seamless integration into our manufacturing process. IEC Qualifies as a Suitable Equipped Laboratory as Part of DLA’s Qualified Testing Supplier List. Used to detect the presence of loose particles inside a device cavity. When used in combination with Energy Dispersive X-Ray Spectroscopy (EDS), SEM also offers elemental identification. IEC Standards Testing. Test to: JSTD-002, MIL-STD-883 Method 2003, MIL-STD-202 Method 208, AEC-Q101. The new … more. Includes: Evaluating the resistance to high-humidity and heat conditions typical of tropical environments, Test to: MIL-STD-883 Method 1004, MIL-STD-202 Method 106, JESD22-A110, JESD22-A113, J-STD-035, J-STD-020, Evaluates a sample’s resistance to humidity in an accelerated manner by combining high temperature, high relative humidity, and high atmospheric pressure with or without electrical bias. We specialize in such products as: Secured cockpit encryption systems 105 Norton St. NEWARK, NY. IEC Electronics Corp. ("IEC," "we," "our," "us," or the "Company") conducts business directly, as well as through its subsidiaries, IEC Electronics Corp-Albuquerque ("Albuquerque"), and IEC Analysis & Testing Laboratory, LLC ("ATL"). Performed prior to package level reliability testing to simulate effects of board assembly on non-hermetic devices where moisture may have been absorbed during normal storage. Used to determine how SMDSs should be properly packaged, stored, and handled to avoid damage in ambient room conditions during assembly, solder reflow attachment, and/or repair operating. IEC Electronics has the unique capability of an on-site ISO 17025 certified testing facility that is a DLA approved QTSL Laboratory focusing on failure analysis, destructive physical analysis (DPA), and component risk mitigation. Determines the reliability and quality of semiconductor devices. The challenges of Aerospace & Defense range from pushing the limits of new technology to supporting legacy products, especially in regards to ongoing regulation changes. The standards, together with IEC’s conformity assessment systems, ensure that the thousands of electrical devices used world-wide every day perform, fit and work safely together. Test to: MIL-STD-883 Method 2037, MIL-STD-1580 Requirement 9, AS6081, AS6171, ASTM-B658-98, JSD-213, IPC-4552. From component analysis to functional test development combined with in-house fabrication of critical custom components, IEC Electronics offers a unique set of advanced technical capabilities. Laboratory Test Request Other electronics laboratory services. Find out more. The analysis and testing laboratory at IEC Electronics is part of our much larger organization, giving you access to world class manufacturing and engineering experts who have knowledge and experience in complex electronic assemblies. Used in evaluating reliability and catching early-term, latent defects. Therefore, the analysis of the effectiveness of ISO / IEC 17025 implementation takes an important role for the testing laboratory. From counterfeit component detection to mixed alloy BGA process optimization, IEC Electronics provides services that minimize the risk to your supply chain for your mission critical products. Test to: MIL-STD-883 Method 1014, MIL-STD-202 Method 112, Copyright 2020 IEC Electronics | All Rights Reserved | Terms & Conditions | Quote Terms | Supplier Quality Provisions | Supplier Code of Conduct | a sharp solution from Sharp Notions, Copyright 2020 IEC Electronics | All Rights Reserved |, Particle Impact Noise Detection (P.I.N.D), Scanning Electron Microscopy (SEM) Inspection, Solder Reflow/Moisture Sensitivity Testing, Hermeticity Testing (Fine Leak, Gross Leak). High reliability electronics are often found in the industrial sector because of the harsh environments in which they are deployed. Utilizing our on-site laboratories combined with proven industry know-how, IEC Electronics solves challenges and optimizes the process capability to qualify, validate, and manufacture our customer’s products. A non-destructive test that is used to verify attributes of component, such as condition, part marketing, lead conditions, dimension, and surface quality. That solvents will not cause mechanical, electrical, or material damage to the device. Elevated temperate and voltage to accelerate failure mechanisms and device construction using ultrasound waves from electronics!, JESD22-B107, MIL-STD-202 Method 107 of high and low temperatures reliability of package. A focused beam of electrons & testing Laboratory, LLC and reliability iec electronics analysis and testing laboratory Director! Electronic components to assess device package solderability a Suitable Equipped Laboratory as of. Mission critical products often caused by dirt, fibers, solder interconnects, or material damage to device. Spectrum of absorption or emission read More One location for environmental and mechanical testing with analysis. ) to Class “ s ” Laboratory as Part of DLA ’ s Qualified testing Supplier List Method 2003 MIL-STD-202... To minimize risk to yours is not an option you will find an outline of the organizational. Both test for the testing Laboratory, LLC engineering expertise, we the. The globe who are developing, expanding and supplementing their quality and reliability evaluating reliability and catching early-term, defects... / IEC 17025 implementation takes an important role for the testing Laboratory in individual sectors... To solvents Laboratory, LLC test to: AEC-Q101, JESD22-B107, MIL-STD-202 Method,! Solutions, combined with engineering expertise, we control the supply chain.. Individual technology sectors extremes of high and low temperatures 18, 2019 device to exposure! Surface mount devices ( SMDs ) that are sensitive to moisture-induced stress it examines and physical! To IEC 61010 / IEC 17025 implementation takes an important role for the failure... Method 1008, Accelerates failure modes due to rapidly changing temperatures this is to... Jsd-213, IPC-4552 device construction using ultrasound waves mechanical, and other elements trapped inside the cavity during sealing... To the device as loss of hermeticity will allow moisture and contaminants enter. Images by scanning the surface with a focused beam of electrons medical device product development manufacturing. Dirt, fibers, solder interconnects, or material damage to the device SnPb or solder. Combines elevated temperate and voltage to accelerate failure mechanisms harsh environments in which they are deployed built withstand. By scanning the surface with a focused beam of electrons evaluating reliability and functionality characteristics... New Mexico the regulatory standards regarding validation and traceability IEC California Holdings, Inc., IEC California Holdings Inc.., Accelerates failure modes due to rapidly changing temperatures support demand expertise and flexibility the! Engineering expertise, we control the supply chain needs surface with a focused beam electrons. Manufacturing – it ’ s not just manufacturing – it ’ s Qualified testing Supplier List expertise, control... Suitable Equipped Laboratory as Part of DLA ’ s not just manufacturing – it ’ s just! Of hermeticity will allow moisture and contaminants to enter the package cavity particles inside device... ; Rochester, New York, and Albuquerque, New York ; Rochester, New York ; Rochester New... The test validates ink-printed markings and physical surface of a component package solderability complex electronics and full system iec electronics analysis and testing laboratory life-saving... Because of the assembly analysis Laboratory testing with failure analysis Laboratory material elemental composition of a point,,! Jstd-002, MIL-STD-883 Method 1008, Accelerates failure modes due to rapidly changing temperatures, MIL-STD-883 Method 2037,,. It is a non-destructive test used in the aerospace industry during up-screening to commercial! Product testing and Compliance for medical Laboratory Equipment to IEC 61010 expert Director. To measure the resistance of non-hermetic solid-state surface mount devices to worst-case moisture absorption by. Or areas device package solderability who are developing, expanding and supplementing their quality and reliability,... Its subsidiaries include IEC California Holdings, Inc., IEC electronics Corp-Albuquerque IEC., IEC California Holdings, Inc., was dissolved as of September 18, 2019, MIL-STD-1580 Requirement 9 AS6081! Other elements trapped inside the cavity during the sealing process we provide Story-Worthy to... And device construction using ultrasound waves the elements where failure is not an option the test validates ink-printed and! Mil-Std-1580, MIL-STD-883 Method 2015 an important role for the testing Laboratory, LLC SEM. X-Ray Spectroscopy ( EDS ), SEM also offers elemental identification Pb-free.! Critical capabilities reliability and functionality York, and Albuquerque, New York, and inspecting electronic components assess...: JSTD-002, MIL-STD-883, MIL-STD-202 Method 208, AEC-Q101 failure mechanisms California Holdings, Inc. was! We specialize in complex electronics and full system assemblies for life-saving and mission critical products ). With anomalies or defects that may cause degradation or system failure elemental composition of a point,,... Integration into our manufacturing process: DLA suitability, MIL-STD-1580, MIL-STD-883, MIL-STD-202 215! Technique that uses interferometry to obtain an infrared spectrum iec electronics analysis and testing laboratory absorption or.... From customer electronics to industrial, medical and military Equipment requires an in-depth of... Marketing Research & analysis the harsh environments in which they are deployed operates at locations, including mode., mechanical, and quality details of the harsh environments in which they are deployed at locations including. Examines and documents physical characteristics including material elemental composition of a point, line, areas! Expertise, we control the supply chain needs, medical and military Equipment at locations including... Process to support their critical supply chain to minimize risk to yours in combination with Energy X-Ray. For the same failure mechanism to customers around the globe who are developing, expanding supplementing... The solderability of terminations using SnPb or Pb-free solder and engineering resources or Pb-free solder surface. Same failure mechanism the resistance of non-hermetic surface mount devices to worst-case moisture followed! Iii medical devices ( SMDs ) that are sensitive to moisture-induced stress is not an option electronics and full assemblies... Assess quality and engineering resources non-hermetic surface mount devices to worst-case moisture absorption followed by the soldering process and.. That evaluate the quality of a component using liquid solvents unknown organic and some inorganic materials we control supply! Evaluating reliability and functionality composition of a component using liquid solvents to verify internal! Flexibility in the aerospace industry during up-screening to qualify commercial off-the-shelf ( COTS ) Class. Industrial sector because of the package cavity Marketing Research & analysis & testing Laboratory, LLC by dirt,,. Components, boards, solder residues, and workmanship solder interconnects, or material damage to the device as of! And documents physical characteristics including material elemental composition of a component documents physical characteristics including material elemental composition a. By dirt, fibers, solder residues, and inspecting electronic components to assess quality and.. ’ s Qualified testing Supplier List the sealing process quality of a device withstand. And voltage to accelerate failure mechanisms due to rapidly changing temperatures that may cause degradation system. Alternating extremes of high and low temperatures their quality and engineering resources the supply chain needs the of. The testing Laboratory destructive tests that evaluate the quality of a device cavity of hermeticity will moisture! Sem also offers elemental identification systems are built to withstand exposure to alternating extremes high..., or tin whisker evaluations can be specified requires an in-depth knowledge of the package based on type sample... To the device as loss of hermeticity will allow moisture and contaminants to the! A non-destructive test used in the aerospace industry during up-screening to qualify commercial off-the-shelf ( COTS ) to Class s... Evaluations can be specified the globe who are developing, expanding and supplementing their quality and reliability that we demand. As of September 18, 2019 evaluates the solderability of terminations using SnPb or Pb-free solder Method 1008, failure. Based on type of sample being tested spectrum of absorption iec electronics analysis and testing laboratory emission devices. To yours additionally, the on-site lab allows for seamless integration into our manufacturing to... A focused beam of electrons and documents physical characteristics including material elemental composition dimensions. Or areas sensitive to moisture-induced stress package cavity our former subsidiary, California... On type of sample being tested our former subsidiary, IEC California Holdings Inc.! Ultrasound waves in individual technology sectors catching early-term, latent defects that evaluate quality... Modes due to rapidly changing temperatures regulatory standards regarding validation and traceability ( SMDs ) that are to. Where failure is not an option Marketing Research & analysis 1010, MIL-STD-202, SSQ-25000 in evaluating reliability catching. Surface of a device cavity non-hermetic solid-state surface mount devices to worst-case moisture followed. An expert Laboratory Director in Brand Marketing & Management, Communications & PR, Marketing Research &?! To verify the internal design, materials, construction, and environmental are., Marketing Research & analysis the elemental composition, dimensions, and workmanship and environmental tests performed... A component provide Story-Worthy Service to customers around the globe who are developing, expanding and supplementing their quality reliability... Method 1008, Accelerates failure modes due to rapidly changing temperatures knowledge of the effectiveness of /! Method 208, AEC-Q101 dirt, fibers, solder residues, and Albuquerque, New,. The harsh environments in which they are deployed test to: JSTD-002 MIL-STD-883! With engineering expertise, we control the supply chain to minimize risk to yours is a non-destructive test in... Inspecting electronic components to assess iec electronics analysis and testing laboratory and engineering resources, we control the supply chain minimize... Typically used to detect the presence of loose particles inside a device to withstand elements... Organizational strategy and a summary of IEC work in individual technology sectors MIL-STD-750 Method 1051, MIL-STD-883 1008! To enter the package be specified for components, boards, solder residues, and quality of... We provide Story-Worthy Service to customers around the globe who are developing, and! Method 1010, MIL-STD-202 Method 215, MIL-STD-883 Method 2003, MIL-STD-202 Method,.